Ioline Control Center Version 5 for the Macintosh requires:

• System 7.5.3 or later
• A PowerPC or newer processor
• The Communications ToolBox and the Serial Tool Extension

Serial Tool Extension: This installer will add the Serial Tool Extension to the Extensions Folder in the active System Folder if it does not already exist. It will not replace the Serial Tool Extension if it is already there.

To connect an Ioline plotter to your computer you will need an available serial port or a USB to serial adapter.

USB Users: If you have a newer Macintosh that does not have a serial port, but instead has USB ports, you will need to purchase a USB to Serial adapter to connect an Ioline plotter to your computer. We have tested our software successfully with the Keyspan USB to Serial Adapter and we recommend you use that device for reliable connectivity.

For more information about this adapter, you can visit:

www.keyspan.com USB to Serial Adapter

-Back to Download-