*********************************************************************************************************
				What's New in the Ioline Control Center
					     PN: 107680
*********************************************************************************************************


Released Version 12:
04/08/08

     1) Firmware Update Capabilities
          a) Firmware updates possible for first and second generation logic boards.
          b) First generation logic boards only supports serial firmware update.
          c) Parallel firmware update disabled.
     2) Added Automatic Firmware Installation Baud Rate Increases
          a) Second generation logic boards only. Holding the left shift and control keys while 
             pressing the Install button in the installation window. 
          b) Requires application firmware 551 or later and BootCode 105 or later to function.
     3) Automatic Serial Test fixed.


Released Version 12.1:
05/19/08

     1) Corrected error in clicking the ignore button.  Ignore now correctly proceeds to the next 
        window.
     2) Corrected error in setting permanent and temporary settings.
     3) Updated Display of Firmware Windows.  When the Control Center is in "Ignore Mode" a message
        will appear in the firmware box indicating the ignore mode is on.


Released Version 12.2:
08/05/08

     1) Control Center only supports 2000/XP/and Vista now.
     2) Improved memory issues by unloading rather than hiding many forms.
     3) Pen Adjustments Form
          a) Added/Fixed PF command test.
          b) Fixed bug in Pen Adjustment command, and Pen Cycle test.
     4) Main Window ROM Display
          a) Removed trailing zeroes from firmware.
          b) When in offline mode, OFFLINE is displayed in Red in the ROM display area.
          c) BootCode Version Displayed in ROM Windows.
     5) Send Settings Problem
          a) To prevent errors in sending settings to a device, the Temporary Settings button is 
             grayed out when you click the Permanent Settings button and vice versa.
     6) Firmware Download Problem
          a) Corrected problem in establishing plotter verification.
     7) About Page
          a) Updated Control Center PN for all versions.
          b) Updated OS support details.
          c) Updated Copyright date and about image.
     8) All Main Form Windows
          a) Main window can no longer be resized.
          b) USB info grayed out if not connected with USB.
     9) Startup Problems/Improvements (Error 13 Warnings)
          a) Startup time for Control Center was reduced when early loading of forms where removed.
          b) Added Progress Bar to startup Splash screen.
          c) Fixed startup message box that was causing an error 13 message to display.
     10) Blade Holder Not Detected Problem
          a) In conjunction with the 551.4 firmware, blade is now detected correctly in the Control 
             Center.
          b) Removed Blade Holder checks in the P600Set Form
     11) Legacy Support Module
          a) Added Legacy support module.  It contains a list of all the commands that all ColdFire and 
             331 machines use.  If required, before sending a command to a machine, the legacy functions
             can determine if is supported by the current machine and its firmware.  This prevents using
             commands in the Control Center, that are not supported by the machine's current firmware.
     12) Control Center now uses CDM 2.04.06 WHQL Certified FTDI drivers.


Released Version 12.3:
08/20/09

     1) Added support for the new Ioline CrystalPress.
     2) Control Center now uses CDM 2.04.16 WHQL Certified FTDI drivers.
     3) This version only supports English and Spanish. Chinese is not supported.

Released Version 12.4:
07/07/10

     1) Updated 100 System profile to support 500 grams of force.
     2) Updated Copyright info to 2010.
     3) Updated supported operating systems to include Windows 7.
     4) This version only supports English and Spanish. Chinese is not supported.