Upgrade procedure for Ioline USB drivers
1.26.2010
KSR

>> Required components: <<

A. Installation program.
	Visit the Ioline USB driver web page to get the latest version:
	http://www.ioline.com/support/generic/dl_usb.html

B. Driver installation procedure (used after these steps are complete)
	http://www.ioline.com/support/generic/usb/USB_Install_Gen2.pdf

>> Upgrade steps for users with a previous Ioline Driver installation <<

1. Turn off the Ioline equipment.

2. Open Control Panel>Add/Remove Programs and remove the existing Ioline 
   drivers. They are usually listed as "Windows Driver Package - FTDI CDM 
   Driver Package (xx/xx/xxxx x.xx.xx) where the "x" indicates date and 
   version information. Sometimes more than one of these drivers is 
   installed.

3. Reboot the computer.

4. Run the installation program downloaded above.

5. Turn on the Ioline equipment and follow the normal USB installation 
   procedure documented in USB_Install_Gen2.pdf downloaded above.