Building products for 40,000 customers in 54 countries since 1984
American FlagMade in the U.S.A.
Sales: 1.800.598.0029
Support: 1.425.398.8282
facebook

Resources


   

Download USB Drivers

  • For the Ioline 100, 300, 350HF, FlexJet E, StudioJet, 600Ae, SmarTrac I/S, SmarTrac Contour, and CrystalPress

    Only for equipment manufactured
    on or after January 1, 2008
    Windows®
    x32 / x64 versions
    XP, Vista, Win 7/8/8.1:
      CDM21218_Setup.exe
    Size:
      2.0 MB
    Posted:
      2016.08.11
    Release:
      2.12.18
        Not sure? How to find the current installed version.
         
    Description:
      USB enhances communication by improving the file transfer rate from the PC to cutter. These drivers allow Ioline USB enabled devices to communicate with Windows based PCs and Ioline software.
         
    Readme:
      On most Windows based computers, Ioline USB drivers will upgrade automatically through the Windows Update service. Use the file shown above to manually update the USB drivers if desired. Please refer to the USB Installation Guide for more information. NOTE: If an error appears about "elevation", run the file by right-clicking on it and choosing "Run as Administrator" instead of left-double-clicking on it.
         

    To install:


    Download the driver file to the computer that is/will connect to the machine. Power off any connected Ioline machines then install the drivers by double clicking on the downloaded file.

    Once installation is complete, reboot the computer then connect and power on Ioline equipment to start using the new driver.
  • Reference manual iconLegacy USB driver
    For the Ioline 100, 300, SmarTrac I/S and SmarTrac Contour

    Only for equipment manufactured
    before January 1, 2008
    Windows®
    2000, XP, Vista:
      USB_Drivers_G1.exe
    Size:
      1.8 MB
    Posted:
      April 14, 2008
    Release:
      5.1a
         
    Description:
      USB enhances communication by improving the file transfer rate from the PC to cutter.
         
    README:
      Please refer to the USB Installation Guide PDF document.

    If you are upgrading from an older version, please read the upgrade directions (.TXT) before installation.
         

    To install:


    Self-extracting file. Copy to the PC and run the program to install.

Back to Top