|
Download Control Center Software
for the MacIntosh® Platform Release 5
-
 Control Center Release 5 (English)  
File: |
|
Ioline_Installer.hqx |
Revision: |
|
5 |
Size: |
|
.98 MB |
OS: |
|
MAC System 7.5.3 or later
|
Posted: |
|
October 4th, 2000
|
| |
|
|
README: |
|
Ioline Control Center Version 5 for the Macintosh® requires:
- System 7.5.3 or later
- A PowerPC or newer processor
- The Communications ToolBox and the Serial Tool Extension
Serial Tool Extension: This installer will add the Serial Tool Extension to the Extensions Folder in the active System Folder if it does not already exist. It will not replace the Serial Tool Extension if it is already there.
To connect an Ioline plotter to your computer you will need an available serial port or a USB to serial adapter.
USB Users: If you have a newer Macintosh® that does not have a serial port, but instead has USB ports, you will need to purchase a USB to Serial adapter to connect an Ioline plotter to your computer. We have tested our software successfully with the Keyspan USB to Serial Adapter and we recommend you use that device for reliable connectivity.
For more information about this adapter, you can visit:
www.keyspan.com USB to Serial Adapter
|
| |
|
|
Description: |
|
MAC interface for adjusting plotter parameters for the 600Ae, 600AeX, 28Ae, Stylist Ae, Studio A, 200 System, 300 System, 350HF System, 100 System, SmarTrac I/S, and SmarTrac Contour. |
| |
|
|
To install: |
|
Copy the file to the MAC connected to the plotter and run it by double-clicking on it. Follow the on screen directions to complete the installation. The equipment User Guide has directions for using the Control Center. |
|
