|
Download drivers for AutoCAD
-
 |
These drivers were written for older versions of AutoCAD® and are no longer tested or updated. |
AutoCAD®
10 & 11 driver |
|
acad1011.exe  |
Size: |
|
49 KB |
Posted: |
|
February 1, 2001 |
| |
|
|
Description: |
|
A README.DOC is included for simple installation instructions. There are also other drivers within these versions of AutoCAD® that the plotters will emulate. In the plotter configuration menu, you may select Houston Instruments® (see note below). |
| |
|
|
To install: |
|
Self-extracting file. Copy to the PC and install. |
|
|
|
AutoCAD® 12
driver for DOS®
and Windows® |
|
pliol.exe  |
Size: |
|
88 KB |
Posted: |
|
February 1, 2001 |
| |
|
|
Description: |
|
There are two drivers in this file, pliol.dll is the Windows driver, and pliol.exp is the DOS driver. A README.DOC is included for simple installation instructions. There are also other drivers within these versions of AutoCAD that the plotter will emulate. In the plotter configuration menu, you may select Houston Instruments® (see note below). |
| |
|
|
To install: |
|
Self-extracting file. Copy to the PC and install. |
| |
|
|
AutoCAD®
13 & 14 |
|
acad13.exe |
Size: |
|
59 KB |
Posted: |
|
February 1, 2001 |
| |
|
|
Description: |
|
This driver is written for the DOS version of AutoCAD® 13. However, our plotters will emulate other plotters whose drivers are in the Windows® versions of AutoCAD® 13 and 14. In the plotter configuration menu, you may select Houston Instruments® or HP® plotters, many of which will work as drivers for the Ioline plotters. If your Ioline plotter was manufactured prior to October of 1987, it may not recognize the HP/GL language, in which case it would be best to select one of the Houston Instruments® plotters (see note below). |
| |
|
|
To install: |
|
Self-extracting file. Copy to the PC and install. |
| |
|
|
Note |
| There are several Houston Instruments® drivers that you can emulate to use with an Ioline plotter. For example: DMP-52, DMP-56, DMP-62. |
|
