|
Intuitive SmarTrac™ I/S and Contour Interface
|
See the review in Signs of the Times, May 1999
|
Ioline signcutters are powerful yet easy
|
- Designed for intuitive use and easy maintenance.
- Out of the box, up and running in under 30 minutes.
- Includes an easy to read quickstart guide: I/S Series or Contour Series (will be posted shortly).
|
|
|
Intuitive Keypad
|
- Allows faster setup every time. You get done faster, which means more profit per job,
more jobs per week.
- Quick Test Cut Button makes adjusting for different vinyls easy.
- Dial adjustment for force and speed lets you adjust "on the fly", no pausing necessary,
no LED menu, just turn the dial.
- Repeat plot button stores last job. Makes it easy to do multiple copies without tying
up the computer.
- Down force is easy to adjust to whatever range of down force you need.
- Start/Stop button lets you pause job, forward material for inspection, then resume cutting
where you left off.
|
|
|
Customize Control
|
- Additional easy-to-understand cutter adjustments are displayed on the PC
instead of the complex and cryptic LED used on other cutters.
- Diagnostic tests and test cuts can be performed from the Control Center, which provides
detailed step-by-step instructions as you use it.
- Groups of settings for specific materials can be stored and recalled when needed. The number
of groups of settings that can be saved is unlimited. (Most cutters have only 4)
- The Control Center allows you to scale any job sent to the cutter as needed.
- The range of downforce (high & low limits) can be set to your preference.
Such as a high range for sandblast material (200 gr. to 400 gr.). If all you use is
high performance vinyl, you can set a low range (50gr.-120gr.).
- SmarTrac™ includes a Print Cut Feature used with an optional Print/Cut Alignment tool for
cutting around pre-printed images on vinyl.
- The tagboard cutting feature is used for cutting stencils, diecut labels, and single layer
materials (such as magnetic sheeting).
|
|
|
Convenience Tool Tray on I/S and Contour series SmarTrac™ Machines
|
- Built-in tool tray holds a roll of vinyl, weeding tools, blades, etc. Whatever you need to keep
handy is always close at hand.
|
